Homepage Alutal Temperature Optical Pyrometers - Cement AST AL30

AST AL30

AST Model AL30 provide the advantage of contactless temperature measurement in non-metallic surfaces and also painted metals, coated or anodised.

AST AL30 is designed for easy integration into standard four-wire system. This format combines the high precision digital signal processing with the simple connection. The AST AL30 pyrometer is used for a target temperature ranging from 0 ° C to 1000 ° C. The electronic assembly is protected by an IP 65 box-resistant stainless steel.

I want to quote this product

AST AL30 comes with a USB 2.0 connector cable. The pyrometer can be recharged through the USB port. In this case, no external power supply is required (+ 24V DC required for the analog output operation, laser, RS-232 output / RS-485).

STANDARD SCOPE OF SUPPLY

AST AL30 with Targeting Laser, USB output, USB cable, connection cable 5 m and 1.5 m communication cable.

USE
- Plastic;

- Fluid;

- Eraser;

- Ceramics;

- Wood;

- Glass;

- Coated metals;

- Textiles.

RESOURCES

- High accuracy due to digital linearisation of the output;

- Four-wire form with analog output 4 to 20 mA; 0 to 20 mA; or 0 to 10V;

- Serial communication RS-232 or RS-485;

- 60ms response time (at maximum speed = at maximum speed);

- Very good stability;

- Laser Mira.

ESPECIFICAÇÃO TÉCNICA

MODEL	AST AL30
measured temperature (Sub adjustable analog range)	0°C to 1000°C, 75°C to 1000°C (Adjustable analog output)
Emissivity	0.1...1 Adjustable
Spectral field, ? m	8 ? ...14 ? m
Photodetector Type	Thermopile
Response Time	60msec
Accuracy	T = 0 to 200 ° C ± 2% of reading ° C or 3 ° C (whichever is greater) T = 201 ° C to 1000 ° C ± 1,5% of reading ° C or 4 ° C (whichever is greater). The instrument must be at a constant room temperature for at least 30 min.
Repeatability	0.3% of reading in ° C + 1 ° C (whichever is greater). Instruments must be at a constant room temperature for at least 25-30 min (in connected mode).
Proportional Distance measurement point	50:1, 100:1
Analog flow	4-20 mA ou 0-20 mA ou 0-10 V User selectable
Digital output	UBS 2.0, RS-232/RS-485(Isolated) User selectable
Energy	24V DC
Sight	Pilot Laser (PL)
Protection Class	IP 65
Operating Temperature	0°C...+70°C, 0°C...+200°C (with refrigerating)
Isolamento	Fonte de alimentação, saída digital e saída analógica são galvanicamente isolados um contra o outro
Storage Temperature	-20°C...+70°C
Dimensions / Weight	Diameter: Ø49.5 mm; Length.: 118mm/ Weight=0.6 kg.
Adjustable parameters by Software	Emissivity, analog output, address, response time, peak picker, analog output.

Notice:
After the startup of the power supply, keep pyrometer under stable temperature condition for 25-30 minutes for accuracy and resolution. The laser should only be used for targeting purposes. In the normal measurement laser should be turned off for correct measurement.

SOFTWARE "INTRASOFT"
- Emissivity setting;

- Definition of the response time;

- The picker Pico configuration;

- Average temperature adjustment;

- Oline graphics or offline;

- Analog output;

- Data calculations.