Homepage Alutal Temperature Optical Pyrometers - Glass AST AL514

AST AL514

AST Model AL514 offers the advantage of measuring the temperature of quartz glass surfaces and without contact. AST AL514 is designed for easy integration into standard four-wire system.

This format combines the digital signal of high precision processing with the simple connection. The pyrometer AST AL514 is used for the target temperature ranging from 400 ° C to 2500 ° C. The electronic assembly is protected by durable stainless steel IP65.

I want to quote this product

The AST AL514 is provided with a USB 2.0 connector cable. The pyrometer can be recharged through the USB port.
In this case, no external power supply is required (+ 24V DC required for the analog output operation, laser, RS-232 output / RS-485).

STANDARD SCOPE OF SUPPLY

AST AL390 with Laser Targeting or aiming lens, USB output, USB cable, connection cable 5 m and 1.5 m communication cable.

USE

- Hardening and bending the glass;

- Measurement of float glass temperature.

RESOURCES

- High accuracy due to digital linearisation;

- Four-wire form with analog output 4 to 20 mA; 0 to 20 mA; or 0 to 10V;

- Serial communication RS-232 or RS-485;

- 60mseg of response time;

- Very good stability.

SAÍDA USB 2.0

TECHNICAL SPECIFICATION

MODEL	AST AL30
measured temperature (Under adjustable analog range)	400° C to 2500 ° C
Emissivity	0.2 ... 1 Adjustable
Spectral field, ? m	5,14 ? m
Photodetector Type	Thermopile
Response Time	60msec.
Accuracy (Room temperature at 23 ± 5 ° C) ? = 1, 1 sec response time	<500 ° C is 1.5% accuracy of the temperature reading; > 500 ° C is 1% precision temperature reading; (The instrument must be in constant temperature environment for at least 25-30 min)
Repeatability	0.3% of reading in ° C + 1 ° C (whichever is greater). Instruments must be at a constant room temperature for at least 25-30 min (in connected mode).
Proportional Distance measurement point	50:1
Analog flow	4-20mA or 0-20mA or 0-10V selectable by the user
Digital Output	USB 2.0, RS-232 / RS-485 (Remote) User selectable
Energy	24V DC
Sight	Laser Pilot (PL) or or through the viewfinder lens (TL)
Laser Power	<1m W
Protection Class	IP 65
Operating Temperature	0°C...+70°C, 0°C...+200°C (with refrigeration)
Isolation	Power supply, digital output and analog output are galvanically isolated against each other
Storage Temperature	-20°C...+70°C
Dimensions / Weight	Diameter: Ø49.5 mm; Comp.: 118mm/ Weight=0.6 kg.
Adjustable parameters via Software	Emissivity, analog output, address, response time, peak picker, analog output.

Note: After starting the power supply, keep pyrometer under stable temperature condition for 25-30 minutes for accuracy and resolution. The laser should only be used for targeting purposes. In the normal measurement laser should be turned off for correct measurement.

SOFTWARE "INTRASOFT"
- Emissivity setting;

- Definition of the response time;

- The picker Pico configuration;

- Oline graphics or offline;

- Analog output;

- Data calculations.