The product
PT-200 Series Low Profile Pump Traps are a low-maintenance, non-electric solution for moving condensate or other liquids from low points, low pressures, or vacuum spaces to an area of higher elevation or pressure. Condensate can be returned well above the 200˚F (93˚C) limit of conventional electric condensate pumps without the problems of leaking seals or cavitation.
Features
- Economical non-electric operation
- No leaking seals, impeller or motor problems means lower maintenance
- Low-profile body fits in tight spaces while allowing minimal fill head
- Lower installation costs
- Standard unit is intrinsically safe—explosion-proof
- Cast iron construction means long service life
- Internals are all stainless steel for corrosion resistance and long life
- Springs are made from long-lasting Inconel X-750.
- All valuable Btu’s are captured and returned to the system
- The pump can be used in flooded pits without fear of electrocution or circuit breaker defaults
Typical applications
- Low-pressure heating systems
- Process heat exchanger or coils with modulating steam control
- Remote installations (tracing, tank farms, or remote coils)
- Systems under vacuum
- Hazardous (explosion-proof) areas
- Caustic environments
- Sumps or submersed areas
- Flash tanks
Product Specifications
| Model | PT-204 | PT-206 |
| Connection Type | Screwed | Screwed |
| Maximum Allowable Pressure | 150 psig (10 barg) | 150 psig (10 barg) |
| Maximum Allowable Temperature | 450°F (232°C) | 450°F (232°C) |
| Body Material | ASTM A48 Class 30 Cast Iron | ASTM A48 Class 30 Cast Iron |
| Mechanism Material | Stainless Steel with Inconel X-750 Spring | Stainless Steel with Inconel X-750 Spring |
| Maximum Operating Pressure | 125 psig (8.5 barg) | 125 psig (8.5 barg) |
| Capacity Range | 2,400 lb/hr (1,089 kg/hr) | 3,700 lb/hr (1,678 kg/hr) |
