The product
Primary differences between our 4 standard-temperature accelerometer offerings are summarized in the table below:
| SA6200A | SA6200 | SA6120 | SA6250 | |
| Freq Response
(+/- 3dB) |
0,5 Hz – 10 kHz | 0,5 Hz – 12 kHz | 0,2 Hz – 11,5 kHz | 0,8 Hz – 15 kHz |
| Mounted Resonance |
13 kHz | 18 kHz | 25 kHz | 40 kHz |
| Sensing Element |
Quartzo | Quartzo | cerâmico | cerâmico |
| Cable Connector |
Topo | Topo | Lado | Topo |
The SA6250 uses a built-in amplifier to provide a 100mV/g low-impedance, constant-current output that is compatible with vibration monitoring systems, electronic switches, and 4-20mA signal conditioners.
The sensor consists of a temperature-stabilized piezo-electric core and an amplifier, packaged together in a 316 stainless steel case that is electrically isolated from the sensing circuit. A choice of mounting studs is available. Consult the product datasheet for available hazardous area approvals.
Product Aprox. Weight: 91 g (3.2 oz)
Acessories
- Bulk Cable: 9061-XXXX
- Mounting Studs:
– 3719-002
– 3719-007
– 3719-008
– 3719-009 - Sensor Spot Facing Kit: 9338-101
- Mount Adaptors:
– Stainless Steel Flange: 7084-002
– Magnetic: 99506-020
– Magnetic: 99506-021 - Splashproof Cable Assembly: 8978-111-XXXX
- Splashproof Cable Assembly with SS Armor: 9334-111-XXXX-YYYY
- Cable Assembly with SS Armor: 9334-211-XXXX-YYYY
- Accelerometer EP Housing: 7295-002
- Connector Assembly:
– 8978-211-XXXX
– 8978-200-0000 - IP67 Cable Assembly: 8978-311-XXXX
