FLEXBOR Series
The FLEXBOR series was developed for measuring the temperature continues in lines of production of rubber hoses, where a fast response time and high resistance due to the abrasiveness and density of the measured material is required. With far superior to other market performance sensors are sensors that can last 6-8 times longer than a standard sensor.
Technical Diagrams
Série FLEXBOR
Tables
Tabela Especificação em Português / Specifications Table in English
| Prefixo | Calibração* | Diâmetro Ponteira (mm) |
Comprimento "A" (mm) |
Baioneta | Cabo | Comprimento "L" (mm) |
Opções |
| FLEXBOR | K - Termopares K (faixa 25 ~ 700°C) - Precisão± 1°C ou0,4% f.e |
5 - 5 mm 6 - 6 mm 8 - 8 mm |
Especificar | P - Pequena M - Média G - Grande |
TT - Teflon x Teflon, Bitola 2 x 24 AWG FF - Fibra x Fibra, Bitola 2 x 24 AWG |
Especificar | RBC - Certificado decalibração em 3 pontos |
| J - Termopares J (faixa -40 ~ 550°C) - Precisão± 1°C ou 0,4 F>E. |
| Prefix | Calibration | Tip Diameter (mm) | "A" Length (mm) | Bayonet | Cable | "L" Length (mm) | Options |
| FLEXBOR | K - K Thermocouples (Range 25 ~ 700C) - Accuracy ± 1 ° C or 0,4% f.e J - J Thermocouples (Range -40 ~ 550 ° C) - Accuracy ± 1 ° F or 0.4 CM> E. | 5 - 5 mm 6 - 6 mm 8 - 8 mm | To specify | P - Small M - Medium G - Great | TT - x Teflon Teflon Gauge 2 x 24 AWG FF - Fiber x Fiber Gauge 2 x 24 AWG | To specify | RBC - Certificate calibration 3 points |
Notes:
*Para sensores duplos, duplicar a letra K ou J.* For dual sensors, doubling the letter K or J.
Folders
Certificates
Alutal performs tests in all stages of the production process of its sensors. Check below the tests and certifications applicable for this series. If you want to get a copy of the tests for the lot of your purchase, request with the commercial department at the time of your order.
Certificates for this series:
Quotation
