pressao medicao-custodia nivel temperatura vibracao fluxo Alutal Measure & Trust alutal brazil spain usa calculator caret-left caret-right facebook-square Homepage Alutal linkedin phone whatsapp whatsapp-square instagram youtube angle-down search bars industrias exclamation-circle united-eletric metrix magnetrol servicos gases
+1 (512) 658-7592
Homepage Alutal Level and Volume Pulse burst radar Pulsar® model R96- 6 GHz non-contact radar transmitter

Pulsar® model R96- 6 GHz non-contact radar transmitter

The Pulsar® Model R96 is a loop-powered, 24 VDC, non-contact radar level transmitter. It has a longer measurement range, improved diagnostics and is easier to use than most loop-powered radar transmitters.
Pulse burst radar technology

Pulse Burst Radar emits short bursts of energy to a liquid surface. Ultra-high-speed timing circuitry measures the time of the signal reflected off the liquid surface.

Sophisticated signal processing filters out false reflections and other background noises. The exact level is then calculated, by factoring in tank height and other configuration information. The circuitry is extremely energy efficient so no duty cycling is needed as with other radar devices. This allows the device to track high rates of level changes up to 4,5 m/minute (180"/min).

Features

  • Performance not process dependent (changing specific gravity and dielectric have no effect)
  • 6 GHz operating frequency offers superior performance in the tougher applications of turbulence, foam, and heavy vapors
  • Antenna designs to +400 °F (+204 °C)
  • Range up to 130 feet (40 meters)
  • Quick connect/disconnect probe coupling allows vessel to remain sealed
  • SIL 2 capable with Safe Failure Fraction (SFF) = 92.7% (FMEDA available upon request)
  • PACTware™ PC software interface with new improved DTM.

Options

  • HART® 7.1 and Foundation fieldbus™ digital communications
  • 316 stainless steel dual compartment enclosure
  • 4" and 6" horn antennas
  • Polypropylene and Teflon® rod antennas
  • Antenna nozzle extensions

Antennas

Horn antennas
Pulse burst radar horn antennas are a robust and electromagnetically efficient design that offers the highest level of performance in typical through-air radar applications. The largest horn antenna should be used to ensure the best possible performance in all operational conditions.


Dielectric rod antennas
For a large number of pulse burst radar installations that require 6 GHz operation where an existing process connection will not accommodate a horn antenna, Magnetrol offers a dielectric rod antenna. Typically constructed of 316SS and TFE or polypropylene, additional materials are also available.


Operating principle


PULSAR transmitter technology is based on pulse-burst radar technology together with equivalent time sampling circuitry. Short bursts of 6 GHz microwave energy are emitted and subsequently reflected from the liquid level surface.


Approvals

ATEXEx d, Ex ia, Ex n
CSAXP, IS, NI
FMXP, IS, NI
EAC (GOST)Ex d, Ex ia, Metrology
IECEx d, Ex ia
SILSIL 2 (1oo1)
Other approvals are available. Consult factory for more details.
  • Manuals