The product
Another important application is in extension cable splices or compensation , therefore, when used , for example , a common connector or Sindal block may exhibit read errors ( a new cold seal will be created) if the temperature at the site is different from where the reading instrument is installed. In this case, apply the ” law of intermediate metals”
Are polarized ( negative pin has a higher or in the case of mini connectors diameter is wider ) than the positive , avoiding the frequent and troublesome polarity reversals that always cause inconvenience to the process. To further emphasize , the body is engraved in relief, the polarity of each terminal . They are available in calibrations T , J, K , N, E , S / R and B and thermoresistance , having staining according to ASTM E -230 (ANSI MC- 96.1 ) , IEC 60584-3 and DIN 43710-4 for wires and extension / compensation wires.
Mini connectors – MCS
Connector for thermocouples or resistance thermometers 2-wire , suitable for connecting small gauge wires and cables minerals .
Mini double connectors – MCD
Connector for double thermocouples or resistance thermometers 2-wire pairs , suitable for connecting small gauge stranded wires and minerals .
Mini connectors with lock – MCT
self-locking connector for thermocouples . The lockout feature prevents unwanted disconnection due to vibration , etc.
Mini connectors for resistance thermometer – MCR
Connector for connecting heat resistance 3-wire . It can also be used for thermocouples , wherein the third pin serves as connection to earth or continuous shielding.
Mini connectors high temperature – MCH
Connector for thermocouples or resistance thermometers 2-wire , suitable for connecting small gauge wires and cables minerals . Use to 350 ° C .
Mini ceramic connectors – MCC
Connector for thermocouples or resistance thermometers 2-wire , suitable for connecting small gauge wires and cables minerals . Use up to 650 ° C.
Standard connectors – CPS
Connector for thermocouples or resistance thermometers 2-wire, suitable for connecting extension cords / compensation with diameter up to 8 mm and minerals cables.
double standard connectors – CPD
Connector for double thermocouples or resistance thermometers dual 2-wire, suitable for connecting extension cords / compensation with diameter up to 8 mm and minerals cables.
Standard connectors for resistance thermometer – CPR
Connector for connecting heat resistance 3-wire. It can also be used for thermocouples, wherein the third pin serves as connection to earth or continuous shielding.
Standard connectors for high temperature – CPH
Connector for thermocouples or resistance thermometers 2-wire, suitable for connecting extension cords / compensation with diameter up to 8 mm and minerals cables. Use to 350 ° C.
Ceramic standard connectors (650 ° C) – CPC
Connector for thermocouples or resistance thermometers 2-wire, suitable for connecting extension cords / compensation with diameter up to 8 mm and minerals cables. Use up to 650 ° C.