The product
MG SERIES FEATURES
| Nominal sizes | 2 – 24 inches |
| Material | Stainless steel, Ductile iron, Special material |
| Pressure rating | 0 – 235 psi |
| Flange drilling | PN10, PN16, ANSI Class 150, BS10-D, BS10-E, AS2129-D, AS2129-E |
| Face to face dimension | EN 558 series 20 |
DETAILS
The gate is mechanically guided throughout the entire stroke.
The cross seal can be repacked at any time and under full pressure using the side sealing bolts.
Robust 4-post topwork for maximum load and a wide range of actuator types.
Optimized housing design to minimize solids build-up due to the gate geometry.
AREAS OF APPLICATION
Biogas plants e.g. Food waste, household waste, wood chips, manure, substrates, other renewable resources…
Mining e.g. Coal dust, mining slurry, sintered water, tailings, acids and phosphates…
Chemical and petrochemical industries e.g. Viscous slurries, Chemically contaminated waste water, Bitumen/tar…
Infrastructure e.g. Water waste…
Coal-fired power plants e.g. Coal pulp…
Food and beverage e.g. Cereals, vegetables, puree, etc., cocoa beans…
Pulp and paper industry e.g. Cellulose pulp (low to high density), liquor (black, white, green) …
Wastewater treatment plants e.g. Waste water, Raw water, Sludge, Digested sludge …
Water treatment e.g. Sea water, salt water…
CONSTRUCTION MATERIAL
| Part | Ductile iron | Stainless steel |
| Body | EN-GJS-400-15 | 1,4408 |
| Gate | 1,4301, 1,4462 | 1,4404*, 1,4462* |
| Stamp | NBR | NBR |
| Topwork | Carbon steel | Carbon steel |
| Rod / Piston | 1,4104 | 1,4104 |
PROTEÇÃO CONTRA CORROSÃO
| Body | 2 Comp. Epoxy-Polyamide Resin Primer, 2 Comp. Polyurethane-Enamel Top Coat |
| Topwork | 2 Comp. Epoxy-Polyamide Resin Primer, 2 Comp. Polyurethane-Enamel Top Coat |
ACTUATORS
- Handwheel
- Bevel gear
- Pneumatic cylinder
- Hydraulic cylinder
- Electric actuator
