The product
FEATURES W0-W1-W2-W3
Nominal sizes | 50 – 1200 mm |
Material | Stainless steel, Carbon steel, Cast tin bronze, Cast aluminum bronze |
Classificação de pressão | 0 – 50bar |
Pressure rating | ANSI Class 150, ANSI Class 300 |
Face to face dimension | MSS-SP135 Class 150 short, MSS-SP135 Class 150 long, MSS-SP135 Class 300 short, MSS-SP135 Class 300 long |
DETAILS
The robust universal bonnet can be used for a wide variety of actuator types. Many different additional parts can be easily fitted.
Robust full flange body design for tough conditions and maximum flexibility with regard to flange designs.
The gate is mechanically guided over the entire stroke.
The flange threads make assembly considerably easier, while at the same time allowing dead-end installation.
The robust cross seal is equipped with pressure-assisted scrapers, which clean the gate, protect the seal profile and thus ensure a longer service life.
AREAS OF APPLICATION
Mining e.g. Mining slurry, sintered water, tailings, process minerals.
CONSTRUCTION MATERIAL
Part | |||
Body | Ni-resistance | Ni-ductile resistant | Carbon steel |
Gate | 17.4 PH | 17,4 PH | 17,4 PH |
Stamp | GFLT | Aflas | GFLT |
Topwork | Carbon steel | Carbon steel | Carbon steel |
Piston rod / Piston rod | 430 Chrome Steel | Steel 17.4 PH | 430 Chrome Steel |
CORROSION PROTECTION
Body | Ecoat |
Topwork | Epoxy powder coating, stainless steel |
Screws | B4, stainless, B7 |
ACTUATORS
- Handwheel
- Bevel gear
- Pneumatic cylinder
- Hydraulic cylinder
- Electric actuator