The product
- Self-Regulating, Energy Efficient
- 16 AWG Buss Wire
- Circuit Lengths to 660 Feet
- Process Temperature Maintenance to 150°F (65°C)
- Maximum Continuous Exposure Temperature, Power Off, 185°F (85°C)
- Industrial Freeze Protection Applications
- Single or Dual Monitor Wires Available
- Field Splicing Without Disrupting Heat Output
- 3, 5, 8 and 10 W/Ft.
- 120 and 208 – 277 Volt From Stock
- Approximate Size .47 in. W x .20 in.H
- Min. Bend Radius 1-1/8 in.
- For Use on Metal and Plastic Pipes
- Factory Mutual (FM) Approved, UL Listed, and CSA certified for ordinary areas.
- ATEX, IECEx, FM, and CSA Approved for hazardous (classified) areas when used with U Series, HL, DL, and EL accessories.
Features
- Energy efficient, self-regulating SRL uses less energy when less heat is required.
- Easy to install, SRL can be cut to any length (up to max. circuit length) in the field.
- Field splices can be performed easily in minutes with no scrap or wasted cold sections.
- SRL features lower installed cost than steam tracing, less maintenance expense and less downtime.
- SRL can be single overlapped without burnout, which simplifies heat tracing of in-line process equipment such as valves, elbows and pumps.
- Because SRL is self-regulating, over-temperature conditions are minimized.
- Chromalox termination, splice, tee and end seal kits reduce installation time.
SRL Heat Trace Cable Applications
- Freeze Protection
- Process Maintenance, Low Temperature
|
Features of SRL Cable |
|
| Max. Maintenance Temp. (°F) | 150 |
| Max. Exposure Temp. (°F) Power Off | 185 |
| Max. W/Ft. | 10 |
| Max. Circuit Length (Ft.) | 95 – 660 |
| Buss Wire Size | 16 |
| Voltages | 120, 208-277 |
| Hazardous Ratings | Yes |
| Usable on Plastic Pipe | Yes |
| Cut-to-Length in Field | Yes |
| Field Splicable | Yes |
| Can be Overlapped | Yes |
| Output Varies with Temp. | Yes |
| Varies Output Along Length | Yes |
| Accessories | DL/EL/U |
| Monitor Wire Available | Yes |
|
SRL Corrosion Selection Guide |
|
| Moisture | C, CR, CT |
| Aqueous Solutions of Inorganic Compounds | CR, CT |
| Liquids Organic Chemicals Acids or Bases | CT |
| Acids or Bases | CT |
C – Tin-Plated copper metallic braid for additional protection and ground path
CT – Fluoropolymer corrosion resistant overjacket over braid for hostile/corrosive environments
CR– TPR overjacket over braid for protection against certain inorganic chemical solutions
